34
QUICK SET MENU
It is possible to set the following Menu in [ Capture Settings]
quickly by pressing the
button.
Qs1 (Quick Set Menu 1) Qs2 (Quick Set Menu 2)
ISO Setting
White Balance
Flash Mode
Metering Mode
Image Size
Color Mode
Image Quality
Drive Mode
When the camera is in the Still Image Mode, the Quick Set Menu will
be displayed by pressing the
button. (By pressing the button
again, it is possible to switch to Qs1 or Qs2.)
Select the desired Menu by pressing the 4-way controller and change
the setting.
For example, if you wish to change the
ISO Setting to 400, press the
button
to display Qs1, then set the value to 400
by pressing the
button several times.
By pressing
or the shutter button
“half-way”, the settings will be applied
and the camera will return to shooting
mode.
When you select (Custom) from [White Balance], the current
stored setting in [
Custom] will be used.
It is not possible to capture a new custom white balance from
(Custom) in Quick Set Menu. Please capture a new custom white
balance from [
Shooting Menu] (P. 2 6) → [White Balance] →
[Custom].
WARNING !!
• When Image Quality is slected to RAW, Image Size will be set to
(Hi) automatically. It is not possible to select any other Image Size.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
