Sigma DP2 User Manual

37
INSERTING AND REMOVING THE CARD
The DP2 camera uses a SD memory card, SDHC memory card
and Multimedia card to store data.
TO INSERT THE CARD
1
Turn off the camera and open the
Battery/ Card Cover, as shown in the
illustration.
2
Insert the card in accordance with the
instruction of Battery/ Card chamber.
Insert the card until it clicks.
3
Close the Battery / Card Cover.
Slide the Battery / Card Cover in the
direction shown by the arrow until it clicks
shut.
TIP
• It may be necessary to format the card before use. (See P.39)

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g