Sigma DP2 User Manual

23
USING A HOME POWER SUPPLY (Sold Separately)
You can power the camera from a wall outlet using the provided AC
Adapter - (SAC-3). When using your camera for an extended period of
time, reviewing the pictures or connecting the camera to a computer or
cleaning the image sensor, we recommend that you operate the camera
from a household power outlet.
1
Connect the AC cable to the AC adapter. ①
2
Turn off the camera and connect the plug of the AC adapter to the camera. ②
3
Insert the plug of the AC cable into a wall outlet. ③
When you have finished using the camera, please turn off the camera and
disconnect the plug from the wall socket.
When using the DP2 with an AC power supply, the battery icon shows the full
symbol, regardless of the power level of the battery. If you start to operate the
camera on battery power, the display will change and show the remaining power
level of the battery.
WARNING!!
• While the Busy Lamp is on, do not change the power supply by any
means. Doing so can result in data loss or damage to the camera or card.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g