Sigma DP2 User Manual

70
AUTO ROTATE
It is possible to record the vertical image information to images.
The Auto Rotate can be set by [ Capture Settings] (P.2 6 ) → [Auto
Rotate].
Off The vertical image information will not be recorded.
On* The vertical image information will be recorded.
The default setting is [On].
● When vertically orientated images are reviewed, they will
automatically rotate and be displayed vertically.
● When vertically orientated images are reviewed in Sigma Photo Pro,
they will automatically rotate and be displayed vertically.
● When vertically orientated images are rotated by pressing
[
Playback Menu] → [Rotate], this rotated orientation will be
stored.
WARNING !!
• If the images are taken while the camera is pointed up or down, the
vertical position information may not be recorded properly.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g