28
•
Settings are laid out as follows. Some setting may be different depending
on the function. Please refer to the relevant page of each function.
For example, to adjust the [Image Size] setting from [
Capture
Settings]:
1
Press the
button whilst the
camera is in a still image exposure mode
and [
Capture Settings] will be
displayed.
2
Press the button and select [Image
Size] then press the
button.
3
In Open Display, select the desired
image size by pressing the
button
and press the
button to apply the
setting. The applied image size will be
highlighted in blue.
4
By pressing the button or the shutter button “half-way”, the
Camera Set-up menu will disappear and the DP2 will be changed to
shooting mode.
WARNING!!
• After changing the settings in [ Camera Settings], return the Mode
Dial to any position except SET UP. If the Mode Dial is set to the SET
UP position, it is not possible to shoot, review images or play movies.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
