Siko AG05 - Readable Parameters and Error Memory

Functional Description
AG05 Date: 15.06.2016 Art. No. 85677 Mod. status 139/16 Page 19 of 64
Parameter
Description

S commands
Selection:
: execute no S command
: execute no S command
: Set standard parameters to default
: Set controller parameters to default
: Set display parameters to default
: Set bus parameters to default
: Calibration
: Delete error memory
Table 8: Options menu
4.3.1.7 Controller parameters
Menu


Sub-menu


Parameter
Description

Controller parameter P
Value range: 1 - 500
(see chapter 8: Parameter description  Parameter no. 1)

Controller parameter I
Value range: 0 - 500
(see chapter 8: Parameter description  Parameter no. 2)

Controller parameter D
Value range: 0 - 500
(see chapter 8: Parameter description  Parameter no. 3)
Table 9: Controller parameters menu
4.3.2 Readable parameters
Menu


Parameter
Description

Current output stage temperature

Current control voltage

Current output stage voltage

Current battery voltage