Communication via SIKONETZ5
AG05
Date: 15.06.2016 Art. No. 85677 Mod. status 139/16 Page 56 of 64
10.8.6 Flow chart: Operating mode: Speed mode
Fig. 11: Flow chart speed mode SIKONETZ5
10.9 Parameterization via SIKONETZ5
On principle, the actuator sends a telegram acknowledging write and read commands of the
master. With the command executable the value adopted is in the reply telegram.
If the actuator was unable to execute the command, e. g. because it attempted to write a
value beyond the admissible range, the actuator will send an error telegram in reply.
Access
rw = read write
ro = read only
wo = write only
Acknowledge error
Start
CW = Control word SIKONETZ5
SW = Status word SIKONETZ5
x = Bit can be '0' or '1'
To Next Page
Loading...