Siko AG05 - Bus, Positioning, and Actuator Parameters

Functional Description
AG05 Date: 15.06.2016 Art. No. 85677 Mod. status 139/16 Page 13 of 64
4.3.1 Changeable parameters
The Changeable parameters menu is subdivided into further sub-menus:
Menu
Sub-menu
Description




Bus parameters


Positioning


Actuator


Limiting values


Visualization


Options


Controller parameter


Exit menu
Table 2: Changeable parameters menu overview
4.3.1.1 Bus parameters
Menu


Sub-menu


Parameter
Description

Node address
Value range: 0 - 31
(see chapter 8: Parameter description  Parameter no. 22)

Baud rate
Selection:
: 57600 baud
: 115200 baud
: 19200 baud
(see chapter 8: Parameter description  Parameter no. 33)

Protocol
Selection:
: SIKONETZ5
: Service protocol
(see chapter 8: Parameter description  Parameter no. 34)