41
Trouble Silenced
A trouble condition exists, but your system is programmed to silence trouble
sounds. Contact your installer to resolve the trouble condition.
Timeout.
The user has paused for too long while performing a function and will have to
start over. The number of seconds before the system times out can be changed
through programming.
Unbypassed
The zone has been successfully unbypassed.
Zone Is Not
A Valid Zone
User has attempted to bypass a zone that has not been assigned. Valid zone
numbers are 1-999.
Zone Is Not
Bypassable!
Your system is programmed so that this zone cannot be manually bypassed.
Zone Not
Accessible here
The user may have access to all zones, but cannot perform functions on this
touchpad.
Zones In Area
Not Ready to Arm
An attempt was made to arm an area where at least one zone is Not Ready.
To Next Page
Loading...
Need help?
General
