GB
│
IE
│
7 ■
SSMS 600 E6
Assembling
WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the first use, clean all parts as described in the chapter “Cleaning”.
To assemble the hand blender
WARNING! RISK OF INJURY!
► The blade 7 is extremely sharp! Handle it with great care at all times.
■ Place the hand blender 5 on the motor unit 4 so that the arrow
points
to the symbol
. Turn the hand blender 5 until the arrow on the motor
unit 4 points to the symbol
.
Assembling the wire whisk
■ Press the whisk q into the whisk holder 0, until it firmly engages.
■ Place the so assembled whisk q onto the motor block 4 so that the arrow
points to the symbol . Turn the motor block 4 until the arrow points
at the symbol
.
Assembling the shredder
WARNING! RISK OF INJURY!
► The blade 7 is extremely sharp! Handle it with great care at all times.
■ Place the bowl 8 on a dry, level surface.
■ Place the blade 7 carefully onto the holder in the bowl 8. Turn the
blade 7 a little while doing this, so that it slips onto the holder.
NOTE
► The blade 7 is not completely fixed to the holder. This is normal. The
blade 7 is only completely fixed when the bowl lid 6 has been put on.
■ Add the food you wish to chop into the bowl 8.
To Next Page
Loading...
