Appendix C-4 C-MAP attributes
Tide information
ENT
Press [ENT] from the chart display to call up the Info window
3
Press [3] to call up the C-MAP symbols with available facilities
+/-
Use the +/- keys to select the location where you want to know the
tide height
ENT
Press [ENT] to go to the tide symbol on the location
ENT
With the cursor placed on the tide symbol, press [ENT] to call up
the INFO window
2
Press [2] to access chart info
- see display example next page.
If you wish to see the low and high tides for a different date - in the
past or in the future - it is possible to change the date:
Day In the display there will be a red box cursor on the number of the day
in the month. Toggle to a different number (date) with the +/- keys.
Month Use the cursor (right side) to go to the present month. Toggle to a dif-
ferent month with the +/- keys.
Year Use the cursor (right side) to go to the year. Toggle to a different year
with the +/- keys.
CX34/44/54 Operator manual
To Next Page
Loading...
Need help?
General
