The display setup can be adjusted at any time from the Display
setup dialog, activated by pressing and holding the MENU key.
The following options are available:
• Backlight level: Adjusts the backlight level from Min (10%) to Max
(100%) in 10% increments
-
When the Backlight level field is active, subsequent presses on
the MENU key adjusts backlight level in decrements of 30%
• Display group: Defines which network group the unit belongs to
• Night mode: Activates/deactivates the night mode color palette
• Night mode color: Sets the night mode color palette
• Invert day color: Changes the background color for the pages
from default black to white
• Sleep: Turns the backlight for screen and keys off to save power
Ú
Note: All changes made to the display setup will apply to all
units belonging to the same display group. For more
information about network groups, refer to "Network groups" on
page 62.
Display mode
The IS42 unit can be set up as an instrument only, as an autopilot
display only, or as a combination of those two display modes.
• Instrument display only: Displays active data pages. The Autopilot
page can be one of these data pages
• Autopilot display only: Displays only the autopilot page
Basic operation | IS42 Operator Manual
11
To Next Page
Loading...
Need help?
General
