Trip log
The Trip log is available from the Settings menu.
The Trip log is a temporary page, and you cannot configure this
view as one of the user defined pages.
The Trip log remains on the screen until you press the Pages key.
There are three log options available:
• Trip 1: records distance traveled through the water (Log input)
• Trip 2: records distance traveled via GPS input
• Log: shows total distance run from system installation or from a
system restore
Ú
Note: Trip 1 requires correctly calibrated boat speed for
accurate trip records.
Trip 2 requires a compatible GPS connected to the network.
You start, stop and reset the active Trip log from the menu,
activated by pressing the MENU key.
4
24
Trip log | IS42 Operator Manual
To Next Page
Loading...
Need help?
General
