Here is a sample of the Brief format without an active
route:
MX500 Navigator
====================================
21:24:00 UTC 12 Apr 2002
POS Mode : DGPS 3D Datum:W84
POS: N 33 48.5124 W 118 21.0213
COG: 152T SOG: 0.1 Kn
---------------------------------------------------------------
Here is a sample of the Brief format with an active route
or MOB condition:
MX500 Navigator
====================================
21:24:00 UTC 11 Aug 1997
POS Mode : DGPS 3D Datum:W84
POS: N 33 48.5124 W 118 21.0213
COG: 152T SOG: 0.1 Kn
BRG: 239T Dist: 27.4 Nm XTE:0.14L Nm
RTE: RL From WPT 1234 To WPT 1357
---------------------------------------------------------------------------------
Sending: Causes the printer output to be turned On or
Off (default).
Print Interval (Sec): Allows you to control how often the
print out will be sent to the printer port. The default
value is 60 seconds, and the valid range is from 1 to
9999 seconds.
Format: Allows you to choose either the Full or Brief for-
mats described above.
Bit Rate: This allows you to control the port interface
baud rate to match the printer or computer you are in-
terfacing with. The available baud rates are: 600, 1200,
2400, 4800 (default), 9600 or 19,200.
Data Bits: This allows you to match the printer’s require-
ment of 7 or 8 (default) bit serial data.
To Next Page
Loading...
