Simrad MX500 - Make New WPT - Select Lat;Lon (W84), Lat;Lon Datum, or Range Bearing; Edit This WPT

Simrad MX500 | 63
3. Make New WPT
4a. Use WGS-84 Datum
Select
Lat/Lon (W84)
4b. Use Datum Other
Than WGS-84
Select
Lat/Lon Datum
4c. Create a new WPT Based
on a Range & Bearing
from an existing WPT
Select
Range Bearing
Select desired datum
from displayed list.
Press
Select.
Enter desired range
and bearing.
Press the cursor
down arrow .
5. Enter Coordinates
Press the cursor
down arrow .
6. Modify WPT Number
(Optional)
Press the cursor
down arrow .
7. Modify WPT Text
& Symbol (Optional)
Press the
Done softkey .
4
Make New WPT a - Select Lat/Lon (W84), Lat/Lon
Datum, or Range Bearing.
Lat/Lon (W84) - allows you to enter coordinates
in the WGS 84 datum. This choice takes you
directly into the coordinate input screen. Go to
step 5.
Lat/Lon Datum - allows you to choose a datum
(see the list in the screen sample above) from
the more than 110 available Datums. Highlight