Highlight the 4 Change softkey and press ENT to
select which value you want the CDU to calculate,
either ETA based on speed, or speed (SOG) based
on desired time and date of arrival.
SOG Based on Arrival Date & Time:
Enter the arrival time and date. Be sure to enter 1
the date as day, month, year, as indicated on the
screen.
Highlight the 2 Done softkey and press ENT.
In this mode, the actual SOG is compared to the re-
quired SOG to meet the specified arrival date and time.
The result is given in a percentage (%) value next to the
displayed SOG in the NAV screens. If the percentage is
below 100, you will arrive late. If the percentage is above
100, you will arrive early.
To Next Page
Loading...
