226 | Simrad MX500
softkey resets the differential beacon board.
MX Ant Reset Procedure:
This procedure will work only under Engineering level
mode.
Press the 1 AUX key several times to bring up the
AUX7 screen.
Press the 2 EDIT key to bring up the softkeys.
Press the ‘#1’ or ‘NAV’ button 3 times (to bring-up 3
Eng’g level 3).
Highlight the “4 MX Ant Reset” softkey then press
ENT to reset the GPS engine (or the “CSI Reset”
softkey to reset the beacon engine).
Press the 5 EDIT key to exit.
Press the 6 GPS key to display the GPS or DGPS
Status screen.
To Next Page
Loading...
