14 | Simrad MX500
Item Component Part Number
1.0
LAN Patch Cable Assembly (3 m)
(RJ45, single-ended waterproof
connector)
1.1
LAN Cross-over Cable (3 m)
(RJ45, double-ended waterproof
connectors)
500 100 4004
500 100 4005
Ty pe
CAT5
Cross-over
Table 1a: MX500 Waterproof Network Cables
Ethernet Switches:
Ethernet switches allow for the interconnection of more
than two MX500 units. Each MX500 can exchange data
with any other MX500 connected to the switch.
For non-waterproof switches, any standard 10/100 Mbit
Ethernet switch can be used. These devices gener-
ally come with a power adapter which is plugged into a
110VAC (or 220VAC) power outlet.
Fully waterproof, 10-32VDC powered switches are avail-
able from Woodhead Connectivity Ltd.
SIMRAD recommends the following Ethernet switches us-
ing standard Category 5 cables:
Manufacturer
Northstar P/N
Speed(Mbits)
Model
Netgear
Ports
FS108
10/100 Auto
8
ADAM
6520
SW103 5
Table 1b: Ethernet Switches
To Next Page
Loading...
