Press the 3 EDIT key.
Highlight the 4 More softkey and press ENT.
Highlight the 5 More softkey again and press ENT.
Highlight the 6 Unlock all WPT softkey and press
ENT.
Press the 7 EDIT key.
Removing Waypoints
Unlocked waypoints can be overwritten by waypoints
received on the NMEA port or downloaded from the USB
stick. Waypoints that are contained within a stored route
can not be removed until they are removed from the
stored route in the RTE2 screen. If you try to remove a
waypoint stored in a route, a warning will be displayed
indicating the first route a waypoint is stored in.
If the waypoint you want remove is locked, refer to the
Waypoint Lock/Unlock section for a step by step proce-
dure, and then return to this section.
To remove a waypoint:
Select the 1 WPT key until the WPT1 screen is dis-
played.
Move the cursor to the desired waypoint. 2
Press the 3 EDIT key.
Highlight the 4 Remove softkey then press ENT.
To Next Page
Loading...
