Keypad & Display Description
Traffic
Lights
Function Keys
Display
Cursor Key
Select
Virtual Softkey
USB
Connector
Refer to the illustration above. The Traffic Lights on the
left side of the display will tell you how your navigator is
operating.
You need to take care in reading the trafc light indica-
tions, as there are overlapping possibilities between the
GPS and DGPS modes. If you are unsure of the current
operating mode, select the CFG function key and scroll
down to the DGPS selection. If the DGPS mode is select-
ed to anything other than Off, then follow the Differential
GPS Trafc Light Operation. If the DGPS mode is selected
to Off, then follow the GPS Trafc Light Operation.
To Next Page
Loading...
