Simrad NSS evo3 User Manual

GPS source
Selects where the GPS data is generated from.
Speed, Course and Route
Used for manually entering values when GPS source is set to Simulated course or Simulated
route. Otherwise, GPS data including speed and course come from the selected source file.
Set start position
Moves your vessel to the current cursor position.
Ú
Note: This option is only available when the GPS source is set to Simulated course.
Simulator| NSS evo3 Operator Manual
123

Simrad NSS evo3 Specifications

General

Touchscreen	Yes
NMEA 0183 Connectivity	Yes
Operating System	Linux-based
Chartplotter	Yes
Radar Support	Yes
Waterproof Rating	IPX7
Operating Temperature	-15°C to +55°C
Display Size	9, 12, 16 inches
Screen Type	LCD
GPS	10 Hz built-in GPS receiver
Networking	Ethernet, Wi-Fi, Bluetooth
Sonar	CHIRP, StructureScan
Power Supply	12V DC
Video Input	2
Card Slots	2 x MicroSD
Processor	Quad-core processor
RAM	1GB
Internal Storage	8GB
Resolution	1280 x 800 (12")