A device connected to the NMEA 2000 network should automatically be identified by the
system. If not, enable the feature from the advanced option in the System settings dialog.
The 3
rd
party device is operated by using menus and dialogs as on other panels.
This manual does not include specific operation instructions for any 3
rd
party device. For
features and functionality, refer to the documentation included with the 3
rd
party device.
SmartCraft VesselView integration
SmartCraft data can be displayed and interaction are enabled through the unit when a
Mercury VesselView® 4, 7, 403, 502, 702, 703, or Link is present on the network.
When the features are enabled, the display may prompt the user for some basic
configuration information. Refer to the VesselView® manual or engine supplier for further
information.
The engine supplier icon appears on the Home page when a device is available.
Suzuki Engine panel
If a Suzuki C10 gauge is available on the network, a Suzuki engine icon is added to the Home
page. An icon is also added to the Page editor. You can select to display the Suzuki engine
panel as a full page panel or as part of a multi-panel page.
The layout and content of the engine panel depends on selected panel size. The digital
gauges can be customized, refer to "Customizing the panel" on page 103.
FUSION-Link integration
FUSION-Link devices connected to the NMEA 2000 network can be controlled from the NSS
evo3 system.
The FUSION-Link devices appear as additional sources when using the audio function. No
additional icons are available.
Refer to "Audio" on page 104 for more information.
FLIR camera integration
If a FLIR M-series camera is available on the Ethernet network, you can display the video and
control the camera from the NSS evo3.
The FLIR camera is controlled from the Video panel, and no additional icons appear on the
Home page.
Refer to "Video" on page 115 for more information.
BEP CZone integration
The NSS evo3 integrates with BEP’s CZone system used for controlling and monitoring a
distributed power system on your vessel.
The CZone icon is available in the Tools panel on the Home page when a CZone system is
available on the network.
A separate manual is provided with your CZone system. Refer to this documentation and to
the NSS evo3 Installation manual for how to install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone dashboard is added to the
Instruments panels.
Vessel dashboard Navigation dashboard Angler dashboard CZone dashboard
You switch between a panel’s dashboards by selecting the left and right arrow symbols or by
selecting the dashboard from the menu.
Introduction | NSS evo3 Operator Manual
13
To Next Page
Loading...
Need help?
General
