Detach the object from the Flexible Bed. The object can be easily detached by bending the Flexible Bed up and
down. Using the scrapper provided with the printer will be useful.
Be careful not to apply too much pressure while using the scrapper could damage the bed sheet and the
bed. Depending on the filament material the printed output may easily break or damage, please be cautious.
4 Flexible Bed Installation
After a period of time bed locking will automatically released, if bed is unlocked, press the lock button
again to fix the bed into position before installation.
(1) Push the Flexible Bed all the way in as shown in the picture.
(2) Place Flexible Bed fix to position.
(3) If the flexible bed is placed at an angle, it may be difficult to level the bed. Place it down to match the base.
Caution
-
Any foreign substance left on a surface of the bed can cause a problem in printing.
Make sure there is nothing left on the bed before usage.
To Next Page
Loading...
