Sindoh 3DWOX 2X - Page 99

3-5
Printing
3
6 Additional Functions of Pausing
Press the [
] button during printing to pause it, and then press the [Setting] icon to run additional functions.
These additional functions include
[Bed Height Adjustment]
,
[Extruder]
, and
[Cartridge-Load, Unload, and Unlock]
.
These additional functions are used for any mechanical problem or if the user needs them.
   ▣BedHeightAdjustment
①This menu is used to adjust the height of the bed during printing for a high-quality outcome.
②[Save] the adjusted bed height and return to the printing screen to print the adjusted bed height.
③ Press the [Reset] button to return the bed to its previous position.