Singer 9985 - Messages on LCD

SERVICE MANUAL
33
3. Messages on LCD
1. Winding the bobbin.
2. Lower the buttonhole lever.
1
2
3. After sewing buttonhole, raise the presser foot lifter
and set the frame of buttonhole foot to starting
position.
4. Release the foot controller pedal.
5. Lower the presser foot.
6. Machine memory is full.
7. Select a pattern.
8. Release the reverse button.
9. Release the start/stop button.
10.Rethread the upper thread.
3
4
5
6
7
8
9
10
11
12
13
14
11.Foot controller is connected.
12.Release the needle up-down / slow button.
13.Release the thread cutter button.
14.Turn off the power switch.