Singer XL-6000 - Automatic Bobbin Winding (Wind-In-Place); Setting Up and Performing Bobbin Winding

13
Automatic Wind-In-Place bobbin winding
Automatic bobbin winding using needle thread (Standard Sewing Machine)
234
Select amount of
thread to be wound
onto the bobbin.
Slide drop feed lever to
right side.
After threading machine,
press key.
1
2
3
4
5
6
Bobbin to be used
1
Install an empty bobbin
and close bobbin case
cover.
* Be sure to use special bobbin
illustrated above. Standard
bobbins cannot perform
Wind-In-Place bobbin winding.
* Applicable thread sizes are
#30 to #100. Use standard
presser foot (A).
8
Top
Bottom
7
Be sure to turn off the power switch
before installing a bobbin.
*When thread remains on bobbin,
bobbin winder cannot be operated.