47
Button Sewing Foot
The Zigzag stitch is used to attach both 2 and 4-hole buttons.
The button-sewing foot must be attached when sewing a button.
Lower feed dogs. Select zigzag stitch pattern.
1 23
Stitch pattern
to be selected
Presser foot to
be selected
Button sewing
foot
Attach button-sewing foot.
Press reverse button to sew 5
tacking stitches to secure.
Press thread cutting
button, trim thread.
7 89
Slowly press on speed
controller allowing needle to
sew 8 to 10 stitches.
Place fabric on machine, and
place button under button
sewing foot. Tack thread in place.
4 56
Measure distance
between holes in
button to be sewn.
Press stitch width buttons to match holes in
button to be sewn.
NOTE: 3.0mm width will generally sew all
size buttons.
Turn handwheel by hand to
confirm that needle exactly enters
holes in button.
Press reverse button to sew 5
tacking stitches to secure.
Caution: Due to irregular shape of some buttons button foot may not clamp securely.
Do not attempt to sew these or buttons with a shank using sewing machine.
To Next Page
Loading...
