System Setup
5-4
inputted content or Backspace to clear the characters one by one.
5.2.2.3 AC Power Unit
There are 2 units dB and % available for selection. To enter selection menu, select AC
Power Unit on the system setup menu and press
Enter. To select the desired unit, move
the cursor and press
Enter to confirm and return to the previous menu. To exit, press Esc
to return to the previous menu without saving.
5.2.2.4 TGC Curve
Three modes for displaying TGC curve are available, including 3 sec: display for 3 seconds
when TGC is adjusted; Always on: display; and Off: no display.
【Note】: TGC curve is not displayed in image freeze state.
5.2.2.5 Key Lamp
There are 2 Key Lamp setup options for selection. Select Off, and the key lamps are off;
Select On, and the key lamps are on.
5.2.2.6 Print Setup
There are three selections Video Printer: Print the image to the video printer, USB Printer:
Print the image to the USB printer, and USB Disk: Print the image to U disk, available.
Select the different item decides the different external device target for
Print key.
5.2.2.7 Auto Freeze
Four auto freeze functions are available, including Off, 5min, 10min and 15min; they
represent separately that images are never auto frozen, or images are auto frozen after
having no operation on the system for 5 minutes, 10 minutes or 15 minutes.
5.2.2.8 Screen Saver
Four functions of screen saver are available, including Off, 5min, 10min and 15min; they
represent that the screen saver never appears, or appears on the screen after no operation
on the system for 5 minutes, 10 minutes or 15 minutes respectively.
5.2.2.9 Hibernation
Four hibernation time setups are available, including Off, 5min, 10min and 15min; they
represent that the system will enter hibernation state after no operation on the system for 5
minutes, 10 minutes or 15 minutes respectively.
To Next Page
Loading...
