DK32S User Manual (V1.3)
- 46 - 2022 SIYI Tech All Right Reserved
3. In default, channel 1-4 is to be Aileron, Elevator, Throttle, and Rudder.
4. Let’s take example. If you are to re-map Channel 1 (Aileron), enter CH1’s
middle box on and select a joystick/switch/button/dial.
5. Tap on right boxes will lead to a list of trimming switches. Repeat step 4 to
re-map a trimming switch.
Mark
In “Channel Mapping” page, if you are to redefine a channel, tap on the channel name,
it comes a list of definition to all transmitter channels.
To Next Page
Loading...