SIYI DK32S - 3.3 Transmitter-Air Unit Linking

To Next Page

To Previous Page

DK32S User Manual (V1.3)

Mark: DK32S transmitter is equipped with a built-in 5000mAh LiPo 1S battery.

Charging time is about 5 hours using a standard 5V/2A charger adapter. Charging time

may change according to chargers made under different standards, please also pay an

attention to the charging indicator when you are charging the transmitter.

Charging Indicator Definition

Power Off Charging

Solid Red: Transmitter is under charging.

Solid Green: Charging is finished.

3.3 How to Link/Bind DK32S Transmitter to DK32S Air Unit

Each unit of the DK32S transmitter is assigned with a unique ID code. Before

linking DK32S transmitter to DK32S Air Unit, the Air Unit identifies transmitter ID

(Linking/Binding) first. After the first linking process between transmitter and Air

Unit, the ID code will be memorized in the Air Unit so that you don’t have to repeat

the process before the next flight/operation (except when your transmitter must be

linked with a different Air Unit).

Linking/Binding Steps

1. Please keep your DK32S transmitter one meter away from your Air Unit and

power on both;