DK32S User Manual (V1.3)
- 54 - 2022 SIYI Tech All Right Reserved
5.9 Trainer Mode
Trainer Mode (Master-Slave) helps experienced RC Hobbists train new talents.
Under this mode, two DK32S transmitters can be linked through a trainer cable or
be linked wirelessly. All channels are open for trainer mode, users decide which
channel to use, and through a physical switch you can switch between master
transmitter and slave transmitter.
About Trainer Mode
FUNC (Function)
OFF to turn off.
Wired to use trainer cable. Wireless to use wireless trainer.
MODE
Switch between master transmitter and slave transmitter.
CTL SW (Control Switch)
Define a physical switch to switch between master transmitter and slave transmitter.
JOY CTL (Joystick Control)
ON to take over control from slave transmitter on mater transmitter.
To Next Page
Loading...