SIYI DK32S - 1.3 Precautions on Charging

DK32S User Manual (V1.3)
- 9 - 2022 SIYI Tech All Right Reserved
Before finishing flight, power off the aircraft first, then the transmitter.
Before doing any setting or adjustment to the transmitter, make sure the aircraft
engine is powered off and motor wires are off connection, in case of an accidental
power-on.
Before fly an aircraft for the first time, make sure that the fail-safe function in the
DK32S transmitter is activated.
Before fly an aircraft for the first time, power on the transmitter first and hold the
throttle joystick at its bottom position, then power on the aircraft.
1.3 Precautions on Charging
DK32S transmitter is equipped with a built-in Li-Po 1S rechargeable battery,
compatible with standard USB chargers (5V/2A output) in market.
Considering there are many different types of chargers, please read the prohibited
and mandatory carefully before charging DK32S transmitter.
Do not use any USB chargers over 5V output to charge DK32S transmitter.
Make sure DK32S transmitter is powered off before charging. And the charging
current should not exceed 2A.
Stop charging if you find the charger is damaged, broken or overheated.
Stop charging if you sense a peculiar smell, smoke or leak, and sent the transmitter
back to SIYI Technology for detection and testing.