DK32S User Manual (V1.3)
- 64 - 2022 SIYI Tech All Right Reserved
RaOFF (RadarOFF): Turn off radar
AuSpr (AutoSpr): Auto Spraying
MnSpr (ManulSpr): Manual Spraying
LtON (LightON): Navigation light on
LtOFF (LightOFF): Navigation light off
5.14 Joystick Dead Zone
By setting a certain dead zone range, the DK32S transmitter helps user filter out
channel values which are input by touching the joysticks unintentionally.
When the range is set, the channel value does not change if the joysticks stay
moving in the range; when the joysticks move out of the range, the channel value
continues to change.
Steps to Set Dead Zone
1. In the model settings menu, tap on “JstkDeadZone”, in the screen it shows the
Joystick Dead Zone menu;
2. Tap on the range, then “+/-” to input a target range according to your
To Next Page
Loading...