DK32S User Manual (V1.3)
- 45 - 2022 SIYI Tech All Right Reserved
4. After configuring, channel output value does exceed the limit even under
“Programing and Mixing*” mode, which protects servo and other external
devices.
Mark: In “End Point” page, the icon at up-right corner is for resetting all channel
values.
5.5 Channel Mapping
All 16 channels in FT24 transmitter can be mapped freely to joysticks, switches,
buttons, and dials.
Steps
1. Go to “Model” page, tap on “CH Mapping”.
2. The page displays information as in the picture below. Tap on middle boxes will
lead to a list of all joysticks, switches, buttons, and dials.
To Next Page
Loading...