DK32S User Manual (V1.3)
- 70 - 2022 SIYI Tech All Right Reserved
RDStep (RD Stepping Value): Set the stepping value (range: 1-100) of the right dial (RD).
Higher it is, more channel value the channel value increases in a single movement.
SttLck (Setting Lock): When the setting lock is “ON”, password is required for entering
the transmitter setting menu (the default password is “8888”); when the setting lock is
“OFF”, no password is required.
RDVal (RD Value): When it is “Unsaved”, the RD channel returns to the default channel
value (1500) the next time you power on the transmitter; when it is “Saved”, the RD
channel stays at the channel value before the last powering off.
6.2 Screen Lock & Display
To Next Page
Loading...