DK32S User Manual (V1.3)
- 86 - 2022 SIYI Tech All Right Reserved
7.1.2 Automatic Linking
When the sky station is powered on, turn on the automatic linking function. If it
receives no signal from the transmitter in 20 seconds, the sky station starts linking
to the transmitter automatically.
The automatic linking function is to simplify procedure. It is necessary to turn on
the function before installing the sky station into the aircraft body, in case that they
may have no approach to the linking button of the sky station.
CAUTION
Do not turn on the automatic linking function when you are using more than one sky
stations at the same time.
7.1.3 Voltage Telemetry
When the voltage telemetry function is turned on, in the PWR (power) column of
the DK32S transmitter main menu, users can check the real-time display of the
aircraft voltage telemetry.
7.1.4 Remote Control Relay
The function helps users with long distance flight relay. It supports two transmitters
at most.
How to Use the Remote Control Relay Function
To Next Page
Loading...