DK32S User Manual (V1.3)
- 51 - 2022 SIYI Tech All Right Reserved
The sub-trim function helps users set the middle position value of a channel’s and
do trim adjustment to the aircraft’s flight attitude.
Before doing sub-trim settings, please make sure that the target sub-trim channel
is in its middle position.
CAUTION
It is not a good idea to use sub-trim function when you are flying an agricultural drone.
Steps to Do Sub-Trim Settings
1. In the model settings menu, tap on “Sub-trim”, in the screen it shows the
sub-trim menu;
2. Select a channel according to your requirement; use the virtual turntable to
select a target middle channel value;
3. Repeat step 2 if you are to adjust any other channels.
To Next Page
