SIYI DK32S - Page 66

To Next Page

To Previous Page

DK32S User Manual (V1.3)

pace. The datalink only goes with one drone, which is the drone in control before

activating the “Syn-control” function.

CAUTION

Please keep a safe distance between the drones when the “Syn-Control” function is

activated.

Steps

1. In the model settings menu, tap on “MultiDroCtrl”, in the screen it shows the

multi-drone control menu;

2. Tap on “SwitchDr”, define a 3-stage switch according to your requirement to

switch the control of the drones;

3. Tap on “Syn-Control”, define a 2-stage switch or a button (S3/S4 is better) to

switch on/off the function;

4. Hold the “link” button on the sky station of the drone No.1; when the indicator

blinks red fast, go to the “MultiDroCtrl” menu, tap on “NoLink” of the drone No.1;

When the indicator is on green, linking is finished.

5. Repeat Step 4 for drone No.2 and drone No.3 to finish all the linking process.