SIYI DK32S - Page 72

To Next Page

To Previous Page

DK32S User Manual (V1.3)

Through the H / W settings users can do advanced settings for the left dial (LD) to

switch it between the Position Mode and the Speed Mode and the switch S1 / S4 /

S5 / S6 to switch between Self-locking and Self-resetting.

The Difference between the Left Dial (LD)’s Position and Speed Mode

Position Mode: Output of the LD channel value depends on the dial’s position. More dial

angle it changes, more channel value it outputs.

Speed Mode: Output of the LD channel value depends on the dial’s rotating speed. Faster

the dial rotates, more channel value it outputs. The speed mode is widely used among

aerial photography users to change the camera angle.

Steps

1. In the system settings menu, tap on “H / W Settings”, in the screen it shows the

H / W settings menu;

2. Tap on “Position / Speed” to switch the left dial’s working mode; in speed mode,

“+ / -” is to input the stepping value so as to change the LD’s rotating speed.

How to Define the S1 / S4 / S5 / S6 Switch

In the H / W settings menu, select a switch according to your requirement, tap on

“Self-locking / Self-resetting” to define the working mode.