EXPEDITION TUV
MODEL
600 HO SDI
ENGINE
Engine type 593 HO SDI
Number of cylinder 2
Bore mm (in) 72 (2.835)
Stroke mm (in) 73 (2.874)
Displacement cm³ (in³) 594.40 (36.273)
Maximum horsepower RPM ± 100 RPM 8000
COOLING SYSTEM
Type
Ethyl glycol and distilled
water (50%/50%). Use
premix coolant from BRP
(P/N 219 700 362) or coolant
specifically formulated for
aluminum engines
Coolant
Quantity L (U.S. gal.) 4.5 (1.2)
LUBRICATION SYSTEM
Type XP-S 2-stroke synthetic blend
Injection oil
Quantity L (U.S. oz) 2.5 (84.5)
FUEL SYSTEM
Gas type Unleaded
Inside North America ((R+M)/2) 87 or higher
Pump octane number
Outside North America (RON) 92 or higher
Fuel tank capacity L (U.S. gal) 45 (11.88)
Gas/oil ratio Injection
ELECTRICAL SYSTEM
Magneto generator output W 480 @ 6000 RPM
Ignition type Inductive by BOSCH
Make and type NGK BR8ECS
Spark plug
Gap mm (in) 0.85 (.033)
Battery 12 V, 18 A•h
Headlamp W 60/55 (H4)
Taillight and stoplight W 8/27
Fuse Refer to FUSES section
78
______________________
To Next Page
Loading...
