EasyManua.ls Logo

Ski-Doo Skandic SWT - Page 39

Ski-Doo Skandic SWT
131 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROLS, INSTRUMENTS AND EQUIPMENT
See table below for usual pilot lamps information. Refer to
MONITORING SYS-
TEM
for details on malfunction pilot lamps.
PILOT
LAMP(S)
ON
BEEPER DESCRIPTION
Two stroke engine: Injection oil level is low. Stop vehicle in
a safe place then, replenish injection oil reservoir.
4 short
beeps every
5 minutes
Four stroke engines: Low engine oil pressure. Stop vehicle
in a safe place then, check oil level. Fill to proper level.
If oil level was correct, discontinue use and contact an
authorized Ski-Doo dealer.
Low fuel level. One (1) bar left in fuel level display.
Replenish fuel tank as soon as possible.
Long beeps
repeating
slowly
Reverse is selected.
3 short
beeps
Reverse did not engage, try again.
High beam headlights are selected.
5) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
_______________
37

Table of Contents

Related product manuals