23
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Flight Mode: determines how your Controller joysticks will maneuver X2. You may switch between Mode 1, 2 (default),
and 3 style. To change your flight mode:
Mode 1 Mode 2 Mode 3
Gesture: opens sub menu to toggle on/o Pinch to Fly and Pinch to Zoom
Double Tap to Fly: toggle on/o double tap to fly
Touch gestures:
• Drag vertically to increase or decrease gimbal pitch
• Drag horizontally to adjust yaw
• Pinch and drag your fingers away from each other to digitally zoom in
• Pinch and drag your fingers toward each other to zoom out back to 1x, then out to Superzoom
• Double-tap anywhere on the fly screen to select a location and X2 will fly to that location
Pre-flight
Configure Controller settings
Step 1 - Select the Settings icon
Step 2 - Select Controller
Step 3 - Select Flight Mode
• choose the flight mode that best suits your operating style
On Screen Display:
• Coordinates
• Telemetry - speed, height above launch point, range from launch point, and
camera angle (gimbal pitch) are displayed while in flight
To Next Page
Loading...
Need help?
General
