Skytrak MMV - Parking Lights, Headlights & High;Low Beam Switch

42
Model MMV Rev. 10/11
Operation
Parking Lights, Headlights & High/Low
Beam Switch
With the ignition switch ON use the turn signal
switch (1) to control the high/low beam headlights,
turn ON the parking lights and the headlights. Turn the twist grip end (2) of
the turn signal switch counter-clockwise to the first position (3) to turn the
parking lights ON. Turn the twist grip to the second position (4) to turn the
headlights and parking lights ON. Turn the twist grip clockwise to the OFF
position (5) to turn all the lights OFF. Pull the turn signal switch toward you
to switch from low beam to high beam. When the high beam is ON the high
beam indicator light on the front dash panel will illuminate. When the
blackout light system is activated these lights will not operate.
OS1900
OM1850
1
2
3
4
5