Operation
83
Model MMV Rev. 10/11
Maximum Fork Sweep
Leveling the Vehicle
When placing a load while on a slope, use the frame sway control (see
MODE 3 page 37) to keep the vehicle level. The operator should observe
the frame level indicator (2) to assure that the vehicle is level at all times.
.
CAUTION: Allow for adequate clearance between
the attachment and other objects when turning.
The attachment extends beyond
the end of the vehicle. The oper-
ator must be aware of the maximum sweep (1) of the attachment
when turning in order to avoid hitting personnel and other objects
in the area.
DANGER: Use of the frame sway control with the boom
raised above horizontal can cause tipover resulting in death or
serious personal injury. Always use the frame sway control to level
the vehicle before
raising the boom above horizontal. If the vehicle
cannot be leveled using the frame sway control, reposition the
vehicle.
To Next Page
Loading...