Safety Practices
5
Model MMV Rev. 10/11
Before beginning any maintenance or service, place an Accident
Prevention Tag (1) on both the ignition switch (2) and the steering wheel (3),
stating that the vehicle should not be operated. Actual Accident Prevention
Tags, which can be punched out and used, are included as the last page of
this manual. Retain these Accident Prevention Tags for reuse at a later
date.
At the time of original purchase, the purchaser of this vehicle was instructed
by the seller on its proper use. If this vehicle is to be used by an employee
or is loaned or rented to someone other than the purchaser, make certain
that the new operator is trained, in accordance with the OSHA regulations
referenced on page 3, and reads and understands this Operators Manual
before
operating the vehicle.
In addition, make sure that the new operator has completed a walk-around
inspection of the vehicle, is familiar with all decals on the vehicle, and has
demonstrated the correct use of all controls.
Accident Prevention Tags
New or Additional Operators
To Next Page
Loading...