To Next Page

To Previous Page

SMA Solar Technology AG Mounting

Installation Guide SWebBox20-IEN110711 17

5 Mounting

5.1 Mounting / Installation Location Requirements

Please note the following information on the mounting / installation location of the Sunny WebBox:

• The Sunny WebBox is only suitable for installation in enclosed spaces.

• The ambient temperature must remain between –20 °C and +65 °C.

• Protect the Sunny WebBox from dust, wet conditions, corrosive substances and vapors.

• Observe the minimum clearances to walls, other

devices or objects as shown in the diagram in order

to guarantee sufficient heat dissipation.

• Do not cover the Sunny WebBox.

• The distance from the Sunny WebBox to the

inverters may not be greater than the maximum

permitted distance of the corresponding plant

communication type. Note the specifications in the

respective sections.

• During installation, make sure there is optimal

reception for the transmission paths.

• Certain ambient conditions can reduce the

connection quality and data transmission speed between Bluetooth devices.

– Mount or install the Bluetooth device at a distance of at least 1 m from the following devices:

–WLAN devices

– Microwave ovens

– Other devices that use the 2.4 GHz frequency band

Other manuals for SMA SUNNY WEBBOX

Questions and Answers:

Need help?

Do you have a question about the SMA SUNNY WEBBOX and is the answer not in the manual?

General