SMA Solar Technology AG Appendix
Installation Guide SWebBox20-IEN110711 57
13.4 Information on your Web Browser
In order to be able to call up the Sunny WebBox user interface, you need a current web browser.
You can use the standard settings of your web browser.
Ensure that
• JavaScript is activated.
• If a Proxy server is active in your network, you must set up a proxy exception rule in your
browser (see page 57).
13.5 Setting up a Proxy Exception Rule in Internet Explorer
1. Start Internet Explorer.
2. In Internet Explorer, select "Tools > Internet Options".
3. The "Internet Options" window opens.
4. Select the "Connections" tab, then click [Settings].
5. Select [Advanced].
6. In the filed "For addresses that start as follows, do not use a Proxy server:" enter the address
192.168.*.
7. Confirm entry with [OK] and close all further windows by selecting [OK] in each.
☑ The proxy exception has now been set up.
CurrentPublic Data of the spot values
Key Name of the element made up of device name, serial number of the device and
the parameter name. Individual values are separated by a colon.
Example: <Key>Sunny WebBox:155000234:Metering.TotWhOut</Key>
Min Smallest value in measurement interval / merging
Max Largest value in measurement interval / merging
Mean Average value in measurement interval / merging
Base Number of measured values in the interval / Number of merged values
Period Length of the measurement interval in seconds
TimeStamp Time stamp, at which the average was calculated
Setting Meaning