SMA Solar Technology AG Decommissioning
Installation Guide SWebBox20-IEN110711 45
10 Decommissioning
10.1 Disassembling the Sunny WebBox
1. Remove the plug-in power supply of the Sunny WebBox from the plug socket.
2. Remove the DC plug of the plug-in power supply from the enclosure.
3. Remove the Sunny WebBox network cable.
4. Depending on the mounting type dismount the Sunny WebBox as follows:
Wall mounting
NOTICE
Loss of plant data possible!
Only disconnect the Sunny WebBox from the power grid when the PV plant is not in
operation (e.g. at night). Otherwise, losses during the recording of the plant data may
occur.
NOTICE
Loss of data on the SD card possible
Do not disconnect the Sunny WebBox from the power grid while the "SD CARD" LED is
flashing green or orange. This can damage the file system of the SD card and lead to data
loss. Depending on the amount of data, the saving process can take some time.
To Next Page
Loading...
