SMA SUNNY WEBBOX Installation Guide

Extended Configuration SMA Solar Technology AG
32 SWebBox20-IEN110711 Installation Guide
Deactivating DHCP
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
or
Select "Settings" on the toolbar.
2. Select the "External Communication > Ethernet" parameter group.
3. Select [Edit].
4. Under "DHCP", select "No" in the "Activated" field in order to assign the network settings
statically (see section 6.6.2 "Applying Static Network Settings to the Sunny WebBox"
(page 28)) (Status on delivery).
5. Select [Save].
6. The network settings are assigned manually.
7.1.3 Proxy Server
If there is a proxy server in your network, enter the proxy settings here. The Proxy settings of the Sunny
WebBox are used for connection to the Sunny Portal and for firmware updates to the Sunny WebBox
or the devices in your PV plant.
Using the Proxy Server
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
or
Select "Settings" on the toolbar.
2. In the "Activated" field, select "Yes" in order to use the proxy server.
3. In the "Login" field, enter the login name for the proxy server.
4. In the "Port" field, enter the network port under which the proxy server is available.
5. In the "Password" field, enter the password for the proxy server.
6. Confirm the password entered in the "Confirm the password" field.
7. In the "Server" field, enter the Proxy Server IP address.
8. Select [Save].
☑ The proxy server will be used.
Not using the proxy server
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
or
Select "Settings" on the toolbar.
2. In the "Activated" field select "No" in order not to use the Proxy server.
3. Select [Save].
☑ The Proxy server will not be used.

SMA SUNNY WEBBOX Specifications

General

Brand	SMA
Model	SUNNY WEBBOX
Category	Measuring Instruments
Language	English