To Next Page

To Previous Page

Commissioning SMA Solar Technology AG

24 SWebBox20-IEN110711 Installation Guide

☑The window "Local Area Connection Properties"

opens.

6. Mark "Internet protocol version 4 (TCP/IPv4)" and

select [Properties].

☑The window "Internet Protocol Version 4 (TCP/IPv

4)" opens.

7. Make a note of the network settings in the window "Internet Protocol Version 4 (TCP/IPv4)

Properties". This enables you to reset the computer network settings after configuration of the

Sunny WebBox.

8. Enter the following static network settings for the

computer in the "Internet Protocol Version 4 (TCP/

IPv4) Properties" window.

– Activate the field "Use the following IP address".

– Enter 192.168.0.100 in the "IP address" field.

– Enter 255.255.255.0 in the "Subnet mask" field.

– Delete any entries in the "Default gateway",

"Preferred DNS server", and "Alternate DNS

server" boxes.

9. Select [OK].

10. In the "Local Area Connection Properties" window,

select [OK].

☑ The computer is set to the network settings of the

Sunny WebBox.

Other manuals for SMA SUNNY WEBBOX

Questions and Answers:

Need help?

Do you have a question about the SMA SUNNY WEBBOX and is the answer not in the manual?

General